GC-MS 6800 Gas Chromatograph Mass Spectrometer
GC-MS 6800 Gas Chromatograph Mass Spectrometer (GC-MS) system is widely used in industrial inspection, food processing, environmental protection and pharmaceutical industries. Cost effective and reliable design manufactured to the highest standards. ChemAnalyst l workstation software simplifies all operation procedures and controls the auto-sampler, gas chromatograph and mass spectrometer.
Features
Application Fields
Features
- GC system equipped with electronic pressure/flow control system (EFC/EPC) with El filament for high electron emission efficiency
- Quadrupole with pre-filter and high energy dynode electron multiplier
- Reliable Vacuum system with turbo molecular pump
- Real-time vacuum monitoring with vacuum gauge
- Digital RF Technology ensures better sensitivity and resolution in full mass range
- The ''ChemAnalyst'' software controls auto sampler, GC and MS
- Full scan (SCAN) and selective ion monitoring (SIM) modes
- Quick display of total ion current (TIC) and mass spectrogram
- Accurate qualitative and quantitative analysis with Skyray NIST spectrum database with free online upgrades
Application Fields
- Industrial: textile, electronics, plastics and cosmetics
- Food safety: pesticides, fragrances, additives and food packaging
- Environmental protection: air, water, soil and waste
- Pharmaceutical industry: pharmaceutical and drugs
- Petrochemical industry: refinery, chemical plants
- Public security: explosives, drugs and evidence
-
RoHS Compliant check
- Bis(2-Ethylhexyl) phthalate (DEHP): < 1000 ppm
- Benzyl butyl phthalate (BBP): < 1000 ppm
- Dibutyl phthalate (DBP): < 1000 ppm
- Diisobutyl phthalate (DIBP): < 1000 ppm
| Technical Specifications | |
|---|---|
| GC Specifications | MS Specifications |
| Inlet temperature: Max. 450°C | Source Ionization energy: 5eV-250eV (Adjustable) |
| Pressure range:0-100psi, ± 0.002psi | Mass range 1.5-1000amu |
| Pressure control mod: Electronic pressure control (EPC) | Resolution: Unit resolution (full width at half maximum) |
| Column temperature: 4-450 degrees C | Ion source temperature 100-350 degrees C |
| Split mode: Split/splitless, max ratio: 1000:1 | > Filament emission current: 0-350 mA |
| Heating rate: Up to 1201/min | Detector: High energy dynode electron multiplier |
| Temperature programming: 7 stages/8 platforms | Stability ±0.10 amu/48 hrs |
| Auto Sampler: Optional | Sensitivity: Full scan, 1pg OFN at m/z 272 with S/N >30:1 (RMS) |
| Scan rate: Up to 10000 amu/s | |
| Vacuum: Turbo molecular pump(87L/s) | |
